Para-aramid staple fiber is made of filament as raw material, washed with water, crimped and cut, and then surface-treated, and its appearance is golden yellow. Staple fiber products have a variety of specifications, according to length into three specifications 38mm, 51mm, and 76mm, according to linear density into two specifications 1.65dtex, and 2.5dtex. It is widely used in the fields of anti-cutting gloves, high-temperature conveyor belts, flue gas dust removal filter material, fire fighting material, lifting slings, safety ropes, and so on.
Read MoreSend InquiryPolyaspartic Polyurea Resin GLQ520 is a kind of high performance resin with low viscosity. The unique asparagus cochinchinensis ammonia acid ester structure endows the product with excellent performance such as weather resistance, good luster, water resistance and anti-corrosion. The product It is especially used to prepare two-component polyurethane/ polyurea coatings with high solid content, acrylic coating, potting material etc. The slowly response time, better hardness and tensile strength provide the products with special application demands. This product could be used separately or mixed with acrylic resin with hydroxyl and then crosslink with other aliphatics isocyanate to produce polyurethane/polyurea coatings with high solid content, elastic paint or other protective coatings.
Read MoreSend InquiryPolyaspartic polyurea resin GLQ420 is a kind of polyaspartic polyurea resin with low viscosity. The unique asparagus cochinchinensis ammonia acid ester structure endows the product with excellent performance such as weather resistance,good luster, water resistance and anti-corrosion. It is especially formulated to prepare two-component polyurethane/ polyurea coatings with high solid content, acrylic coating, potting material etc. The faster response time, better hardness and tensile strength provide the products with special application demands. This product could be used separately or mixed with acrylic resin with hydroxyl and then crosslink with other aliphatics isocyanate to produce polyurethane/polyurea coatings with high solid content, elastic paint or other protective coatings.
Read MoreSend InquiryPolyaspartic Polyurea Resin GL 2850XP is a kind of high performance resin with low viscosity. The unique asparagus cochinchinensis ammonia acid ester structure endows the product with excellent performance such as weather resistance, good luster, water resistance and anti-corrosion. The product is especially formulated to prepare two-component polyurethane/ polyurea coatings with high solid content for acrylic coating, potting material etc. The slowly response time, better hardness and tensile strength provide the products with special application demands. This product could be used separately or mixed with acrylic resin with hydroxyl and then crosslink with other aliphatics isocyanate to produce polyurethane/polyurea coatings with high solid content, elastic paint or other protective coatings.
Read MoreSend InquiryHigh Purity Bisphenol A Type Epoxy Resins are used in a variety of applications such as paints, electrical, electronic, civil engineering, architecture, adhesives, flame retardants, etc. due to their excellent physical and chemical properties. In recent years, the performance required for each application has become increasingly sophisticated. Characterized with high purity and low viscosity, this liquid epoxy resin is especially suitable for applications such as electrical and electronics in which cured products exhibit excellent heat resistance and moisture resistance. Cured systems have greater clarity, chemical resistance, higher heat distortion temperature, and lower electrical conductivity than most other standard resins.
Read MoreSend InquiryGreen is one of the professional Pentaerythritol-tetrakis-3-merca Ptopropionate TDS manufacturers and suppliers in China.
Read MoreSend Inquiry